MidNite Solar
MidNite Solar Accessories
- Availability:
- In stock items ship in 1-2 business days. Out of stock items ship in 1-2 weeks.
Description
$45.00
Classic charge controller right mounting bracket.
Size: 7"L x 5"W x 1"D
Boxed: 7"L x 5"W x 3"D
Weight: 1 Lbs.
$45.00
Classic charge controller left mounting bracket.
Size: 7"L x 5"W x 1"D
Boxed: 7"L x 5"W x 3"D
Weight: 1 Lbs.
$2.25 per ft.
MNCAT5-600 USE-2 600 volt rated cable.
Shielded
Double insulated
UV resistant
Direct burial
Shielded
Double insulated
UV resistant
Direct burial
Boxed: Depends on amount ordered
$86.00
Charge controller bracket for mounting ANY Classic to the left side of the Scheider SW E-Panel
Weight: 2.9 lbs Lbs.
$2285.00
Cat 5 cable sold in complete rolls of 1600 feet.
MNCAT5-600 USE-2 600 volt rated cable
Shielded
Double insulated
UV resistant
Direct burial
MNCAT5-600 USE-2 600 volt rated cable
Shielded
Double insulated
UV resistant
Direct burial
Size: Spool 19.75 across x 11.75 deep
Boxed: Truck Frieght only
Weight: 82.6 Lbs.
$31.00
3/4 inch wide panel mount breaker whole plug
Designed to plug unused MNEDC breaker Knock Outs
Sold in packs of 5 with screws included
Designed to plug unused MNEDC breaker Knock Outs
Sold in packs of 5 with screws included
$54.00
Mounting bracket for the Mate 3, allows mounting of the Mate 3 on any of our MidNite E-Panels that support the Outback Inverters.
$26.25
063" x 2.1" x 1.5" One 3/8", five .250, two .203" holes. Used on MNDC shunts for an additional bat minus battery connections.
Size: .063" x 2.1" x 1.5"
Weight: 1 Lbs.
$15.00
One inch close nipple, three one inch lock nuts and two insulating bushings. Use for connecting charge controllers through the side to MidNite E-Panels or other similar enclosures.
Weight: 1 Lbs.
$50.00
50mV/500amp includes taptite mounting screws. Has two 8-32 tapped holes on one end to attach a bus bar. This is the industry standard shunt.
Weight: 2 Lbs.
$74.50
This 1/2 in 1000V Heyco Strain Relief accepts two 6mm PV wires.
Sold in bags of 25. Nut is included.
Sold in bags of 25. Nut is included.
$90.00
For use anywhere you need a water tight hole plug to fill a 1/2 knock out. This is the same hole plug we use on our Nema 4X combiner boxes.
Sold in bags of 25.
Sold in bags of 25.
$6.00
A 1/2 and 3/4 inch wrench used on MidNite's E-Panels where 1/2 inch strain reliefs and MNADAPTER 1/2-3/4 adapters are used. Great tool to get into tight places.
$12.00
$16.00
Replacement fuse adapter to be used with the MNPV12 or MNPV8-MC4. The deadfront for this fuse adapter requires two adapters.
Weight: 1 Lbs.
$40.00
The same Din Rail mount that is used in the 120 vac E-Panels, includes mounting hardware. Holds 5 poles of din rail breakers.
$41.00
The same Din Rail mount that is used in the 240 vac E-Panels, includes mounting hardware.Holds up to 6 poles of din rail breakers.
$135.00
This resistor is made of a ceramic tube with flat, waved alloy resistance wirewound on it.
Size: 15.25"L x 2"W x 3.5"H (includes the connection terminals)
Weight: 3 Lbs.
$135.00
This resistor is made of a ceramic tube with flat, waved alloy resistance wirewound on it.
Size: 15.25"L x 2"W x 3.5"H (includes the connection terminals)
Weight: 3 Lbs.
$180.00
This resistor is made of a ceramic tube with flat, waved alloy resistance wire-wound on it.
Resistor 3 Ohm 1500 watt 1500W/3R
Resistor 3 Ohm 1500 watt 1500W/3R
Size: 18.25"L x 2.5"W x 4.5"H (includes the connection terminals)
Weight: 3 Lbs.
$427.00
16 gauge gray steel accepts one or two EPanels, (wide or narrow). Wires route behind the 2" thick plate for a clean installation. Rear cover plates enclose wires from mounting surface.
Size: 42.3" x 27.6" x 2"
Boxed: 48"L x 31"W x 3"D
Weight: 25 Lbs.
$26.00
Charge controller mounting bracket, left or right. Please indicate which side of the E-panel the bracket is to be mounted. These control brackets work with all Midnite E-Panels EXCEPT THE Schneider SW E-Panel and Nottagutter.
Warranty - 5 yrs.
Warranty - 5 yrs.
Size: 8"L x 4"W x 1"D
Boxed: 12"L x 8"W x 7"D
Weight: 2 Lbs.
$92.00
Dual Classic Mounting Plate used with MidNite E-Panels. Ships with the MNCCCK Close Nipple Kit, 6 Tap Tie screws for mounting the Classics and three 10 x 3/8 Flathead screws to mount the bracket to the E-Panel.
Weight: 3 Lbs.
Related Products
Related Products
MidNite Solar MNPowerflo5 Battery
MidNite Solar
$1,099.00
MNPowerflo5: The Future of Server Rack Power
Revolutionize Your Data Center with Lithium Iron Phosphate Technology
Imagine a wor
MidNite Solar Off Grid Kit
MidNite Solar
$6,499.00
This kit is an incredable value. Retail price of over $9500. Buy as a package and save.
Just add solar, generator or other power source and you're good to go.
Pictures show...
On Sale
MidNite Solar Surge Protector Device
MidNite Solar
Now:
$99.00
Was:
$135.00
Protect Your Solar Investment with MidNite Solar Surge Protector Device
Safeguard your solar power system with the MidNite Solar Surge Protector Device, a versatile and robust solution for both AC...
On Sale
MidNite PV Combiners
MidNite Solar
$77.40 - $495.00
These are the enclosures only - they are pictured wired with breakers. You must buy the breakers and wire the box. They are also available prewired for additional cost.
MidNite MNPowerflo16 Lithium Iron Phosphate wall mounted battery
MidNite Solar
$3,999.00
The new MidNite MNPowerflo16 Lithium Iron Phosphate wall mounted battery is designed to work with the MNROSIE and MN15-12K-AIO closed loop. The Battery uses the Pylontech protocol so it will close...
280 amp busbar
MidNite Solar
$99.00
280 amps, Same busbar used in the Nottagutter. Five, 5/16 studs for battery connections. Comes with auxiliary terminal busbar for six small wires #14-1/0.Breaker and Busbar Torque Values
Brat Charge Controller kit, With Breakers And Wire
MidNite Solar
$313.50
Includes:
Midnite BRAT PWM Charge Controller
Midnite BIG BABY Box
1 Of Our Midnite MNEPV10 Breakers For The Load Output
1 Of Our Midnite MNEPV20 Breakers For The PV Input
1 Of Our Midnite MNEPV30...
300VDC din rail mount breaker - Polarized
MidNite Solar
$46.00
Note: Branch Circuit Rated 489AMidNite's Breakers Are Rated To Break The Full Rated Load At The Rated Voltage Repeatedly, With NO DAMAGE. Always Use A Properly Sized Breaker For Disconnecting.MNEPV...
Arc Fault and Ground Fault kit for Hawke's Bay and Barcelona
MidNite Solar
$165.00
Easy Plug In Options Board
Ground Fault Uses Differential Current Between PV Negative And PV Positive
System Can Be Solidly Grounded For Positive Or Negative Ground
Super Reliable Arc Fault...